The cartridge uses a GF+PP construction, combining glass fiber and polypropylene materials to provide stable filtration performance under elevated-temperature operating conditions. The listed maximum operating temperature is 100°C. Actual suitability should still be confirmed according to fluid composition, pressure, flow rate, and operating duration.

The correct micron rating depends on the particle size to be removed, required downstream cleanliness, contamination load, flow rate, and allowable differential pressure. Available ratings range from 1 to 100 μm, allowing the cartridge to be configured for applications ranging from finer particle removal to general industrial prefiltration.

The listed maximum differential pressure is 3.0 bar at 20°C. Because material strength and allowable differential pressure can change as temperature increases, pressure and temperature should always be evaluated together rather than considered independently when selecting the operating conditions.

Compatibility depends on cartridge outer diameter, length, sealing interface, flow direction, and housing dimensions. The listed cartridge sizes include 20", 40", and 60" lengths with outer diameters of approximately 158–160 mm. Providing your current cartridge model or dimensional drawing is the most reliable way to confirm interchangeability.

Replacement should be based on filtration performance rather than a fixed service interval. Typical indicators include increasing differential pressure, reduced flow rate, longer processing time, or failure to achieve the required downstream cleanliness. Actual service life depends on contamination load, micron rating, fluid properties, operating temperature, and flow conditions.