FBT001/FPT001
Pharma&Biotech, Food & Beverage
Membrane Filter Cartridges
PTFE
| Availability: | |
|---|---|
| Quantity: | |
0.01 Hydrophobic PTFE Filter Element for Sterile Gas Filteration-GMP Compliant,High Efficiency
The high-efficiency 0.01µm PTFE Filter Element is built with an authentic hydrophobic PTFE membrane for sterile, GMP-compliant gas filtration. Its strong hydrophobicity prevents water ingress to protect downstream processes. The membrane ensures absolute retention of particles and microorganisms above 0.01 microns, with each cartridge 100% integrity tested to guarantee reliability in critical pharmaceutical and biotech applications.
FOOD & BEVERAGE
• Sterile Air for Product Contact (Carbonation, Packaging & Aeration)
• Clean Instrument Air for Process Protection
• Finished Product & Ingredient Storage Tank Venting
• Blending & Holding Tank Protection During Transfer
• Sterile Inlet Air for Aerobic Fermentation
• Oxygen/Air Mixture Sterilization for Process Optimization
Compliance: FDA 21 CFR 177.1550, EC 1935/2004
FINE CHEMICAL
• Sterile Air for Aseptic Processing Environments
• Process Gas Sterilization for Manufacturing
• Sterile Venting for Bioreactors & Fermenters
• Bulk Drug Substance & Intermediate Solution Protection
• Vent Filtration during Fluid Transfer Operations
• Sterile Inlet Air for Large-Scale Bioprocessing
• Optimized Gas Composition for Enhanced Cell Growth
Compliance: USP Class VI, ISO 13485, cGMP, FDA (DMF)
0.01 Hydrophobic PTFE Filter Element for Sterile Gas Filteration-GMP Compliant,High Efficiency
The high-efficiency 0.01µm PTFE Filter Element is built with an authentic hydrophobic PTFE membrane for sterile, GMP-compliant gas filtration. Its strong hydrophobicity prevents water ingress to protect downstream processes. The membrane ensures absolute retention of particles and microorganisms above 0.01 microns, with each cartridge 100% integrity tested to guarantee reliability in critical pharmaceutical and biotech applications.
FOOD & BEVERAGE
• Sterile Air for Product Contact (Carbonation, Packaging & Aeration)
• Clean Instrument Air for Process Protection
• Finished Product & Ingredient Storage Tank Venting
• Blending & Holding Tank Protection During Transfer
• Sterile Inlet Air for Aerobic Fermentation
• Oxygen/Air Mixture Sterilization for Process Optimization
Compliance: FDA 21 CFR 177.1550, EC 1935/2004
FINE CHEMICAL
• Sterile Air for Aseptic Processing Environments
• Process Gas Sterilization for Manufacturing
• Sterile Venting for Bioreactors & Fermenters
• Bulk Drug Substance & Intermediate Solution Protection
• Vent Filtration during Fluid Transfer Operations
• Sterile Inlet Air for Large-Scale Bioprocessing
• Optimized Gas Composition for Enhanced Cell Growth
Compliance: USP Class VI, ISO 13485, cGMP, FDA (DMF)
• Hydrophobic PTFE membrane
• High interception rate
• High flow rates and low pressure drop
• The gas interception accuracy is 0.01 μm
MATERIALS OF CONSTRUCTION
| Membrane | Hydrophobic PTFE |
| Cage & Support & End Caps | PP |
| O-rings/Gasket | Silicone/Viton/EPDM/TEV |
| PP | <60 ℃ |
| PP with Stainless Steel Lined End Cap | <85 ℃ |
| PP with Stainless Steel Lining | <95 ℃ |
| Positive/Reverse Pressure Resistance | 4 bar/2 bar (23 ℃) |
| Steam Sterilization | 123 ℃@30 min(for FPT001 Series) |
DIMENSIONS
| Outer Diameter | 68 mm/70 mm |
| Length | 10", 20", 30", 40" |
| Endotoxin | <0.25 EU/ml |
| Extractable | ≤50 mg/10" |
INTEGRITY TEST (BP, 95 %ETHANOL@23 ℃)
| 0.01um | ≥1.1bar |
• Hydrophobic PTFE membrane
• High interception rate
• High flow rates and low pressure drop
• The gas interception accuracy is 0.01 μm
MATERIALS OF CONSTRUCTION
| Membrane | Hydrophobic PTFE |
| Cage & Support & End Caps | PP |
| O-rings/Gasket | Silicone/Viton/EPDM/TEV |
| PP | <60 ℃ |
| PP with Stainless Steel Lined End Cap | <85 ℃ |
| PP with Stainless Steel Lining | <95 ℃ |
| Positive/Reverse Pressure Resistance | 4 bar/2 bar (23 ℃) |
| Steam Sterilization | 123 ℃@30 min(for FPT001 Series) |
DIMENSIONS
| Outer Diameter | 68 mm/70 mm |
| Length | 10", 20", 30", 40" |
| Endotoxin | <0.25 EU/ml |
| Extractable | ≤50 mg/10" |
INTEGRITY TEST (BP, 95 %ETHANOL@23 ℃)
| 0.01um | ≥1.1bar |
| SERIES | MATERIAL | RATING(μm) | END CAP | LENGTH(in) | SUPPORT | PORT | SEAL |
| Phamarmical | PTFE | 0.1μm | 222/Fin | 2.5'' | PP | Silicone | |
| Beverage | 0.22μm | 222/Flat | 5'' | PBT | Interface lining steel | EPDM | |
| 0.01μm | 226/Fin | 10'' | PVDF | Fully lining | Viton | ||
| 1.0μm | 226/Flat | 20'' | PFA | Skeleton lining | TEV | ||
| 3.0μm | DOE/Flat | 30'' | PE | Butyronitrile | |||
| 10μm | 215/Fin | 40'' | GF | PTFE | |||
| 0.22+0.22μm | 215/Flat | PTFE gasket (soft) | |||||
| M20 | Metal-graphite Wound | ||||||
| M30 | |||||||
| 216/Fin | |||||||
| 216/Flat | |||||||
| M15 | |||||||
| Insertion Type | |||||||
| Barbed Type |
SERIES | MATERIAL | RATING(μm) | END CAP | LENGTH(in) | SUPPORT | PORT | SEAL |
Electronics | PTFE | 0.1μm | 222/Fin | 2.5'' | PP | Silicone | |
Phamarmical | 0.22μm | 222/Flat | 5'' | PBT | Interface lining steel | EPDM | |
Chemical | 0.01μm | 226/Fin | 10'' | PVDF | Fully lining | Viton | |
Beverage | 1.0μm | 226/Flat | 20'' | PFA | Skeleton lining | TEV | |
3.0μm | DOE/Flat | 30'' | PE | Butyronitrile | |||
10μm | 215/Fin | 40'' | GF | PTFE | |||
0.22+0.22μm | 215/Flat | PTFE gasket (soft) | |||||
M20 | Metal-graphite Wound | ||||||
M30 | |||||||
216/Fin | |||||||
216/Flat | |||||||
M15 | |||||||
Insertion Type | |||||||
Barbed Type |
| SERIES | MATERIAL | RATING(μm) | END CAP | LENGTH(in) | SUPPORT | PORT | SEAL |
| Phamarmical | PTFE | 0.1μm | 222/Fin | 2.5'' | PP | Silicone | |
| Beverage | 0.22μm | 222/Flat | 5'' | PBT | Interface lining steel | EPDM | |
| 0.01μm | 226/Fin | 10'' | PVDF | Fully lining | Viton | ||
| 1.0μm | 226/Flat | 20'' | PFA | Skeleton lining | TEV | ||
| 3.0μm | DOE/Flat | 30'' | PE | Butyronitrile | |||
| 10μm | 215/Fin | 40'' | GF | PTFE | |||
| 0.22+0.22μm | 215/Flat | PTFE gasket (soft) | |||||
| M20 | Metal-graphite Wound | ||||||
| M30 | |||||||
| 216/Fin | |||||||
| 216/Flat | |||||||
| M15 | |||||||
| Insertion Type | |||||||
| Barbed Type |
SERIES | MATERIAL | RATING(μm) | END CAP | LENGTH(in) | SUPPORT | PORT | SEAL |
Electronics | PTFE | 0.1μm | 222/Fin | 2.5'' | PP | Silicone | |
Phamarmical | 0.22μm | 222/Flat | 5'' | PBT | Interface lining steel | EPDM | |
Chemical | 0.01μm | 226/Fin | 10'' | PVDF | Fully lining | Viton | |
Beverage | 1.0μm | 226/Flat | 20'' | PFA | Skeleton lining | TEV | |
3.0μm | DOE/Flat | 30'' | PE | Butyronitrile | |||
10μm | 215/Fin | 40'' | GF | PTFE | |||
0.22+0.22μm | 215/Flat | PTFE gasket (soft) | |||||
M20 | Metal-graphite Wound | ||||||
M30 | |||||||
216/Fin | |||||||
216/Flat | |||||||
M15 | |||||||
Insertion Type | |||||||
Barbed Type |
Do you offer validation support for regulated industries?
Yes, we provide documentation and technical support for validation processes in industries like pharmaceuticals, life sciences, and food & beverage to ensure compliance and traceability.
How can LOONG Filtration ensure the quality of products?
LOONG Filtration has sent our products to authoritative organizations to do tests, and you can check all the certificates on our product quality page.
Is one-stop shopping at LOONG filtration possible?
LOONG Filtration is dedicated to provide one-stop shopping experience, to simplify customers' purchasing process. We have a wide variety of products covering a wide range offields, so we believe you can find what you need.
What are the industries that use LOONG’s filter cartridges?
LOONG’s filter cartridges find applications in a wide range of industries, including food and beverage, micro-electronics, life and science, industry,water treatment and laboratory use.
How often should filter cartridges be replaced?
Replacement intervals depend on operating conditions, contaminant load, and pressure drop. Regular monitoring and our technical support can help optimize maintenance schedules and reduce downtime.
Do you offer validation support for regulated industries?
Yes, we provide documentation and technical support for validation processes in industries like pharmaceuticals, life sciences, and food & beverage to ensure compliance and traceability.
How can LOONG Filtration ensure the quality of products?
LOONG Filtration has sent our products to authoritative organizations to do tests, and you can check all the certificates on our product quality page.
Is one-stop shopping at LOONG filtration possible?
LOONG Filtration is dedicated to provide one-stop shopping experience, to simplify customers' purchasing process. We have a wide variety of products covering a wide range offields, so we believe you can find what you need.
What are the industries that use LOONG’s filter cartridges?
LOONG’s filter cartridges find applications in a wide range of industries, including food and beverage, micro-electronics, life and science, industry,water treatment and laboratory use.
How often should filter cartridges be replaced?
Replacement intervals depend on operating conditions, contaminant load, and pressure drop. Regular monitoring and our technical support can help optimize maintenance schedules and reduce downtime.