Views: 109 Author: Site Editor Publish Time: 2026-11-11 Origin: Site
Filter wine with a lenticular filter by defining the outlet requirement, trialing a suitable grade and preparing the exact module and housing under their own instructions. The production procedure should follow the wine from its inlet condition through accepted transfer, draining and changeover. Bright appearance at startup supplies only part of that record.
Our industrial buyer's guide covers the underlying system specification. Use the operational sequence below to turn an approved wine-filtration proposal into a controlled cellar procedure. Keep the winery's quality and hygiene requirements with that procedure throughout the work.
Identify where the filtered wine will go. A transfer to storage, preparation for another filter and a bottling operation can impose different outlet requirements. Record the agreed clarity, filterability and any relevant microbial-control requirements.
Include wine style, recent treatments, temperature and upstream preparation in the inquiry. Trial the wine expected to reach the production filter. If the blend or treatment changes, check whether the previous result still represents the lot.
The AWRI filtration resource distinguishes clarity measurements from filterability assessment. Use the winery's agreed methods to evaluate both where needed, rather than assigning capacity from appearance alone.
Request the media formulation, retention-rating basis and intended application for each candidate. Compare candidates on the same wine using the same acceptance methods and endpoint. Document the grade actually tested.
Choose enough area to support the transfer window and the qualified batch volume. Our lenticular filter sizing guide for wine explains the inputs needed for that review. Have the supplier identify how representative trials support its proposed module count.
Avoid choosing a tighter grade simply because it appears more conservative. The proposed stage must achieve its defined task at an acceptable recovery and operating schedule. A grade change needs another assessment of those conditions.
Confirm the module code, connection, cell arrangement and quantity against the approved drawing. Inspect seals and seating surfaces using the equipment instructions. Keep the feed and filtrate routes identifiable during assembly.
Our lenticular system setup checklist helps define the mounting parts, connections and instruments to include. It supports a component review; the model-specific manual provides the assembly and operating procedure.
Check before the run | Record or confirmation |
|---|---|
Wine identity | Lot, upstream preparation and inlet quality |
Medium | Approved code, grade and effective area |
Module installation | Connection, loading and seal arrangement |
Line configuration | Identified inlet, outlet, vent and drain |
Monitoring | Pressure points, flow measurement and sampling locations |
Preparation | Required procedure and completion criteria |
Destination | Acceptance requirement of the receiving stage |
Include removal clearance and handling of wet modules in the installation review. Those tasks affect a complete run even when they occur after the transfer itself.
Obtain the approved wetting, rinsing and any required sanitization instructions for the exact assembly. Establish the permitted fluids, contact conditions and completion criteria before introducing wine.
Document how preparation liquid is separated from accepted product. Keep the preparation record with the lot history, including any storage between preparation and use. Confirm compatibility for seals and other product-contact parts as well as the medium.
Instructions from another supplier or module construction are not a substitute for this file. Where the winery intends reuse, obtain the applicable regeneration, inspection and storage requirements before it builds a production schedule around that assumption.
Fill and vent using the supplier's procedure and establish the intended operating flow. Record wine temperature and both pressure readings. Take the initial outlet sample when the agreed conditioning criteria have been satisfied.
Identify how startup transitions are accounted for in the product record. Measure accepted transfer separately from wine retained in the installation or diverted during preparation and shutdown. The same accounting method should be used when comparing trial and production results.
For oxygen-sensitive wines, define the sampling method and assess the complete installed line. Include connections, hoses and any recovery arrangement in the assessment. The housing format alone does not establish the line's oxygen performance.
Read pressure together with flow, temperature and outlet results. Differential pressure describes the difference between the specified inlet and outlet measuring points. It needs its operating context before a change can be interpreted.
Use a sampling schedule suited to the risk and variability of the lot. Record cumulative volume at each relevant quality result so a supplier can relate the endpoint to the proposed media area.
Change during the run | Information to review |
|---|---|
Earlier pressure development | Feed preparation, temperature, grade and flow |
Low flow from startup | Pump delivery, valves, venting and instrument readings |
Outlet deterioration | Sampling method, seals, seating and the agreed endpoint |
Variable accepted capacity | Lot differences, treatment history and operating conditions |
Unexpected product loss | Startup diversions, retained wine and draining method |
Different behavior after reuse | Preparation history and the module's subsequent-use record |
Stop at the documented equipment limit or agreed quality endpoint. A batch schedule should not require operators to extend a run beyond those conditions.
Determine the winery's final microbial-control strategy with its quality team. Depth clarification can prepare wine for a later stage without establishing that later stage's retention performance.
Where a final membrane stage is specified, keep its applicable validation, preparation and verification requirements in the process plan. Include the final stage's inlet-quality requirements when assessing the depth filter.
Review the LOONGFiltration wine application page when discussing the proposed sequence. Request technical evidence for the exact filtration duty rather than applying a general product-family claim to the finished wine.
Follow the approved shutdown, isolation and service-access procedure. Record accepted output, product recovery and the reason the run ended. Include removal, hardware cleaning and restart in the changeover record.
If reuse is approved, assess the module against the next lot's acceptance requirements. Keep cleaning and storage conditions traceable. A previous acceptable batch does not establish unlimited future capacity.
Review deviations with the supplier using the complete record. This gives the winery a practical basis for changing area, grade or upstream preparation without losing track of product quality.
Select candidates from the actual feed and downstream target, then verify them on representative wine.
Clarity and filterability describe different aspects of the liquid. Use the methods agreed for the intended production stage.
Obtain its approved reduced-load drawing and the corresponding mounting and sealing parts before using that arrangement.
The final process requirements and their validation remain separate. Define the depth stage's role within that plan.
Send LOONGFiltration your lot range, quality targets, current module identification and pressure-volume record. Request a grade and configuration review with the proposed operating assumptions stated.
Visit the LOONGFiltration website or the official YouTube channel for related company resources.