You are here: Home » News » Technology Insight » How to Use a Lenticular Beer Filter: Setup, Grade Selection & Throughput Tips

How to Use a Lenticular Beer Filter: Setup, Grade Selection & Throughput Tips

Views: 26     Author: Site Editor     Publish Time: 2026-11-10      Origin: Site

Inquire

facebook sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

A lenticular beer filter should be operated against a defined beer-quality target and the instructions for its exact module and housing. Start with the beer reaching the filter, select and trial a suitable grade, then record how the assembly performs through the complete transfer. Initial clarity and a fast startup flow provide only part of the evidence needed to approve a production run.

Our lenticular filter selection guide for industrial buyers covers the media and housing specification. This guide focuses on turning that selection into a repeatable brewery procedure, with preparation checks, run records and acceptance criteria that operators can follow.

Key takeaways

  • Select the grade from representative beer and the requirements of the next process stage.

  • Confirm mounting, seals and the permitted operating conditions for the complete assembly.

  • Record inlet and outlet pressure alongside flow, temperature and outlet quality.

  • Assess accepted batch volume, product recovery and the full changeover when reviewing throughput.

Define the beer and select the grade

Give the supplier the beer style, temperature, upstream treatment and expected variation in the feed. Include recent clarity results and any relevant solids or yeast information. Identify where the filtered beer will go and the quality required at that point.

Shortlist media grades against those requirements. Request the rating basis, effective area and intended duty for each candidate. Trial the selected grade on beer that represents production, using the same outlet tests and stopping criteria planned for the full run.

Keep clarification and final microbial control separately specified. Pall's beer final-filtration guidance describes a membrane stage for microorganism removal before packaging. A successful depth-clarification run does not establish the performance of that final stage. Have the brewery's quality team define the required treatment and verification.

LOONGFiltration's beer filtration application page provides a starting point for discussing the position of the depth filter within the line.

Check the lenticular filter setup before assembly

Match the module code and connection to the housing drawing. Confirm the approved number of modules, mounting parts and sealing arrangement. A nominal diameter alone leaves the connection, stack height and support details unresolved.

Use our lenticular filter system setup checklist to review the equipment supplied with the vessel and the parts your site will provide.

Setup item

What to confirm before operation

Module identification

Grade, part code, area and quantity agree with the approved configuration

Mounting and seals

Correct interfaces, supports and serviceable contact surfaces

Flow path

Inlet, outlet, vent and drain locations match the drawing

Instruments

Pressure measuring points and the means of checking process flow

Pump and controls

Suitability for the selected flow and complete assembly limits

Service access

Clearance and handling arrangements for the dome and wet modules

Documents

Applicable assembly, preparation and operating instructions

Inspect parts according to those instructions before closing the vessel. Keep the accepted configuration and replacement-part identification with the operating procedure.

02-check-before-assembly-1600x1000.png

Prepare the medium using its own instructions

Obtain the specified wetting, rinsing and sanitization procedure for the exact module. Record the required fluids, conditions and completion criteria before the first production run. Confirm compatibility for the medium, seals and other product-contact components.

Pall's SUPRAdisc operating instructions distinguish connection arrangements and permitted flow directions for different designs. Those differences are a reason to use the selected product's documentation. Its rinsing or regeneration conditions should not be transferred to another manufacturer's module.

Document how the brewery verifies preparation completion and prevents preparation liquid from entering accepted product. Include the time and materials consumed in the batch record.

Establish the starting condition

Fill and vent the installation using the supplier's approved startup procedure, then establish the intended process flow. Record the module load, beer temperature, inlet pressure and outlet pressure. Collect an outlet sample once the agreed conditioning criteria have been met.

For carbonated beer or a process involving gas-assisted operation, obtain written confirmation of the vessel and connected equipment's suitability. The brewery's approved procedure should identify the permitted service and controls. A liquid-housing description alone leaves those requirements unresolved.

Where oxygen pickup matters, specify the sampling method and measure the installed line's performance. Include connections, hoses and startup transitions in that assessment.

Monitor pressure, flow and beer quality together

Differential pressure is the inlet pressure minus the outlet pressure at the specified measuring points. Interpret it with measured flow and temperature. Pressure can rise while flow is maintained, or flow can fall when the available driving pressure stays fixed.

Use a consistent sampling schedule and record cumulative accepted volume. If the result departs from the reference run, check what changed before adjusting the operating conditions.

Observation

Review against the approved run record

Pressure rises earlier

Feed condition, temperature, selected grade and operating flow

Low flow from startup

Pump delivery, valve positions, air removal and instrument readings

Outlet clarity worsens

Sampling, module seating, seals and the defined quality endpoint

Pressure appears steady

Actual flow, gauge operation and outlet test results

Accepted volume falls

Feed variability, preparation history and the endpoint that stopped the run

Establish operating and quality limits before production. The module's differential-pressure limit and the vessel's service rating describe different constraints; obtain both from the applicable documents.

03-monitor-the-complete-run-1600x1000.png

Improve throughput from measured production results

Assess whether the proposed area can finish the intended lot within the filtration window. Include the smallest planned lot and product retained during startup and draining when comparing equipment arrangements.

Keep transfer time separate from preparation, sampling, draining and changeover. A higher initial flow may have little scheduling value if another activity controls the production window. Use accepted output and the complete run record when reviewing performance with the supplier.

When a batch ends early, identify whether the cause was quality, pressure, available flow or the schedule. Review upstream preparation and feed variation alongside the proposed grade and area. LOONGFiltration's lenticular filter range can support that inquiry, with the selected configuration confirmed against the actual beer.

04-assess-batch-throughput-1600x1000.png

Stop, recover and assess reuse

End the run at the documented equipment limit or agreed process endpoint. Follow the site's approved shutdown and isolation procedure before opening the vessel. Record accepted output, product recovery and any material discarded during transitions.

Evaluate reuse only against the exact module's permitted procedure. Request the required hardware, cleaning and storage conditions, inspection criteria and replacement rules. Keep a record of subsequent quality and capacity after each approved regeneration.

Include removal, hardware cleaning and restart in the changeover assessment. Repeat use needs evidence that the next scheduled beer will still meet its acceptance requirements.

Frequently asked questions

Which micron grade should I choose for beer?

Start with the feed and downstream quality target. Compare documented candidate grades in a representative trial, including accepted volume and product-quality results through the run.

Can every lenticular module be backflushed?

Confirm the permitted flow direction and required hardware for the exact design. Use its written regeneration instructions before adding backflushing to the brewery procedure.

What should I send when a filter runs poorly?

Provide the module code, housing drawing and preparation history, together with time-stamped flow, temperature, inlet and outlet pressures, cumulative volume and quality results. Identify the change from the last acceptable run.

Does bright beer prove microbial stability?

Clarity and microbial stability require their own acceptance evidence. Keep final microbial-control requirements and their verification within the brewery's process and quality plan.

Discuss your brewery operating duty

Send LOONGFiltration your beer description, batch range, current module information and recent run record. Include the quality target and available processing window. Request a brewery filtration review.

Visit the LOONGFiltration website or browse the official YouTube channel for related company resources.

Table of Content
Leave a comment if you are interested.
Welcome your message, we will reply you within 24 hours. In addition, your email will not be displayed.​​​​​​​
INQUIRY
A SPECIALIST IN FILTRATION EXCELLENCE!

 Tel: +86-571-26232618
 WhatsApp: +8619558243921
 Email:
sales@loongfiltration.com
Address: 19.Building 12, No. 42, Tianhe Road, Donghu Street, Linping, Hangzhou, Zhejiang,P.R. China

COMPANY

PRODUCT

APPLICATION

Copyright 2025 LOONG FILTRATION All Rights Reserved. Sitemap | Privacy Policy