Pure cellulose media provides a clean depth-filtration structure with low extractables and good compatibility with sensitive biological fluids. The three-dimensional porous matrix captures contaminants throughout the media rather than only on the surface, helping clarify serum-containing solutions and other process fluids while reducing the risk of premature filter blockage.

Selection should be based on feed turbidity, particle size distribution, solids loading, required filtrate clarity, flow rate, viscosity, and downstream filtration requirements. DKF-M grades cover a range from fine clarification to coarser prefiltration. The correct grade should provide sufficient contaminant removal while maintaining practical flow and differential pressure.

Yes, DKF-M is designed for clarification of serum-containing media, blood products, peptide solutions, and other biological process fluids. However, final suitability should be confirmed according to product composition, protein concentration, required recovery, filtration objective, temperature, and downstream process requirements.

The listed maximum operating temperature is below 80°C. Maximum differential pressure is 2.5 bar at 23°C and 1.0 bar at 80°C. Actual operating conditions should also consider the selected filter grade, seal material, fluid viscosity, process configuration, and required filtration performance.

Replacement should be based on filtration performance rather than a fixed operating time. Typical indicators include increasing differential pressure, reduced flow rate, longer batch processing time, or deterioration in filtrate clarity. Actual service life depends on solids loading, feed composition, viscosity, selected filter grade, flow conditions, and the required final product quality.